土壤中矿物油含量测定方法研究

建立了土壤中矿物油含量的分析方法。采集的土壤鲜样,采用无水硫酸钠进行化学干燥。用四氯化碳提取土壤中的油类物质,采用硅酸镁去除提取液中的动植物油等极性化合物后,使用红外分光测油仪测定提取液中的矿物油含量。此方法具有良好的线性关系,相关系数在0.9999以上。测定下限为1.85 mg/l,测定上限为100 mg/l,测量范围为9 mg/kg～500 mg/kg,方法的灵敏度为1.05。试剂空白加标回收率56%～83%,实际样品加标回收率在69%～74%之间。该法简便快速,灵敏准确,具有广泛的应用前景。     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

东北区域空气质量时空分布特征及重度污染成因分析

东北已成为我国又一个霾污染多发和重发区域.采用2013～2017年东北区域大气污染物地面监测数据、卫星数据和气象数据等信息,探讨了中国东北地区空气质量时空分布特征与重度污染成因.结果表明,"沈阳-长春-哈尔滨"带状城市群是全年污染最严重的区域,空气质量指数(AQI)的空间分布具有明显的季节性,冬季污染最严重,春季吉林省西部周围为椭圆形污染区,夏季和秋季大部分时间空气质量最佳.3个典型的霾污染时期是10月下旬和11月上旬(即秋末和初冬,时期一),12月下旬和1月(即冬季最冷的时候,时期二),及4月到5月中旬(即春季沙尘和农业耕作期).时期一,季节性作物残茬焚烧和冬季采暖用煤燃烧产生的PM_(2.5)强排放是极端霾事件发生的主要原因(AQI 300);时期二,在最严寒月份里,重度霾污染事件(200 AQI 300),主要由燃煤和汽车燃料消耗的PM_(2.5)排放量高,大气边界层较低,以及大气扩散性差等共同引起;时期三,春季PM_(10)浓度较高,主要是由内蒙古中部退化草原的风沙和吉林省西部裸地的区域性扬尘传输造成的.同时,当地农业耕作本身也释放PM_(10),并提升了裸土的人为源矿物尘的排放强度.     

装药结构热安全性试验方法及其特点分析

目的 在装药结构的热安全性试验时选择合理的加热方法.方法 从燃料、加热速率、温度范围、温度可控性、温区可控性、对试件影响等方面对开放油池火烧、可控喷射火烧、红外辐射灯阵、电加热带、电加热箱等常用的加热方式进行对比分析.结果 对于快烤加载,红外辐射灯阵兼具开放油池火烧和可控喷射火烧的优势,能够实现温度为800～1200℃、升温速率不低于200℃/s、温度控制偏差不大于5％的模拟火烧温度稳定控制,且具备清洁环保的优势;对于慢烤加载,红外辐射灯阵兼具电加热带和电加热炉加载的优势,能够实现温升速率3.3℃/h～1.0℃/min可调节,加热温度不低于400℃,温度分区不低于4个的分区慢速烤燃温度控制,且不会给试样反应等级带来额外影响.结论 合理选择慢烤、快烤加热方式,避免对装药结构的反应等级产生影响,是装药结构的热安全性试验时需重视的一个问题.     

Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.     

急性毒性藻红外测试中敏感藻的确定方法

敏感藻是指在急性毒性藻红外测试中对毒物响应的温差大、时间快、种类多、剂量低的特殊藻类.自然藻中是否存在敏感藻以及如何确定,是建立藻红外测试法的关键.为此,开展了敏感藻确定方法的探索性研究.试验用8种藻,重金属、有机毒物、农药各10种进行测试分析,结果表明:短线脆杆藻(Fragilaria brevistriata)对重金属、羊角月牙藻(Selenastrum capricornutum)对有机毒物、纤细裸藻(Euglena gracilis)对除草剂和杀虫剂、水华鱼腥藻(Anabaena flos-aquae)对杀菌剂的平均绝对温差分别为0.21℃、0.27℃、0.19～0.20℃、0.20℃,分别高出各自的总均温差0.07℃、0.15℃、0.07℃、0.08℃;4种藻的平均响应时间1.5～7.0min,较好响应药品的响应率≥80%;发光细菌对部分药品的灵敏度在0.07～50.0mg·L-1,而4种藻对相同药品的灵敏度在0.01～7.0mg·L-1.根据敏感藻定义和试验结果,确定短线脆杆藻、羊角月牙藻、纤细裸藻、水华鱼腥藻分别为重金属、有机毒物、除草剂和杀虫剂、杀菌剂的敏感藻.     

固相萃取富集快速测定水样中痕量铜离子

采用固相萃取（SPE）富集水样中痕量铜离子继以分光光度法测定的方法,对样品浓度、SPE柱流速等诸多影响SPE柱效率的因素进行了研究,建立了一种简便、快速测定水样中痕量铜离子的新方法。结果表明,样品浓度低时,经过SPE柱时流速低,SPE柱富集效率高。当铜离子浓度为0－20μg／L时,铜离子富集倍数可达2000倍,回收率大于90％,相对标准偏差为6．5％,方法检测限可达0．5μg／L。     

分子光谱技术在水体微塑料监测中的应用

水域、陆地和空气中的微塑料污染不仅对人们赖以生存的生态系统有潜在危害,而且对人类的身体健康存在持续性危害。针对这些污染问题开展研究的首要任务之一就是需要鉴定微塑料的成分,从而明确可能产生污染的源头以及引起污染的途径。分子光谱技术是鉴别微塑料最常用的分析方法之一,尤其是红外光谱法和拉曼光谱法。建立了基于分子光谱技术的水体微塑料检测方法,可实现对水体中1～5 000μm尺寸范围内的微塑料的自动化测试。其中,尺寸大于10μm的微塑料颗粒物可以通过显微红外光谱仪进行检测,尺寸大于1μm的微塑料颗粒物可以通过显微拉曼光谱仪进行检测。该方法操作简单、检测速度快、结果呈现直观,可作为微塑料检测的有力工具。     

Infrared thermography reveals effect of working posture on skin temperature in office workers

Introduction. Musculoskeletal symptoms related to using traditional computer workstations are common. Quantitative methods for measuring muscle stress and strain are needed to improve ergonomics of workstations. We hypothesize that infrared thermography (IRT) is suited for this purpose. Methods. This hypothesis was evaluated by estimating muscle activity in upright and traditional working postures with IRT and surface electromyography (sEMG). IRT and sEMG measurements were conducted in 14 female participants with both working postures. First, measurements with the traditional posture were performed. Later, participants had 1?month to adjust to the upright working posture before repeating the measurements. IRT images were acquired before and after a full working day, with sEMG recordings being conducted throughout the measurement days. Participants evaluated their neck pain severity using neck disability index (NDI) questionnaires before the first and after the second measurement day. Results. Spatial variation in upper back temperature was higher (p?=?0.008) when working in traditional posture and the upright working posture reduced (p?p?=?0.003) after working in the upright posture. Conclusion. IRT was found suitable for evaluating muscle activity and upright working posture to reduce the NDI and muscle activity in the upper back.     

燃烧氧化—非分散性红外吸收法测定海水中的碳

采用日本岛津公司ＴＯＣ－５０００分析仪，用燃烧氧化－非分用性红外吸法测定海水中的总有机碳，无机碳的含量，实验相对标准偏差小于２．１２％，ＴＯＣ方法回收率为９９．９％－１０６％。准确度和精度都很高，且由于过程快速简便，氧化率高，方法实性强。